帳號:
密碼:
首頁 | 元件(模組) | 開發板 | 開發工具(箱) | 代理商 | 原廠 | 訂單狀態 | 客戶服務 |
新品搜尋 ﹕ 方法﹕
 
SmartFusion Evaluation Kit
原廠/品牌: ACTEL 上架日期: 04/13
供應商: 大志科技 產品類別: FPGA

     Actel's SmartFusion Evaluation Kit offers a simple, low-cost way to try the world's only FPGA with hard ARM Cortex-M3 and programmable analog. The device contains on-chip flash and on-chip SRAM memory, as well as additional SPI flash memory. The board can communicate via Ethernet and HyperTerminal. The board also contains LEDs, switches, OLED and various voltage, current, and temperature monitoring functions for analog experimentation on the board.

     The kit is supported by Libero Integrated Design Environment (IDE), Actel's design software that includes SoftConsole Eclipse-based GNU software IDE. You can also use a free evaluation version or full licensed version of either Keil or IAR Systems compilers. The quickstart card and the user's guide will walk you through the options for software, downloads, and licensing.

零件編號 封裝 規格說明 單價 庫存 最小量 購量
A2F-EVAL-KIT SmartFusion Evaluation Kit       洽詢 2 週 1 洽詢

The SmartFusion Evaluation Kit board includes:

  • A2F200M3F-FGG484ES
    • 200,000 System FPGA gates, 256 KB flash memory, 64 KB SRAM, and additional distributed SRAM in the FPGA fabric and external memory controller
    • Peripherals include Ethernet, DMAs, I2Cs, UARTs, timers, ADCs, DACs and additional analog resources
    • Refer to the SmartFusion product page for full device information
  • SPI-flash memory connected to SPI_0 on the device
  • USB connection for programming and debug from Actel's design tools
  • USB to UART connection to UART_0 for HyperTerminal examples
  • 10/100 Ethernet interface with on-chip MAC and external PHY
  • RVI header for application programming and debug from either Keil or IAR Systems
  • Mixed-signal header for daughter card support

User Inputs and Outputs

  • OLED display with I2C interface connected to I2C_0 on the device
  • First-order ΣΔ DAC (sigma delta) output with 12-bit 500 Ksps update rate
  • Potentiometer used to vary voltage input for voltage and current monitoring
  • 8 LEDs connected to the FPGA fabric for FPGA demonstration
  • 2 user input switches connected through FPGA fabric
  • Both LEDs and switches can be used with GPIO by connecting through the fabric
  • Selector to choose between GNU SoftConsole or RVI-Header for debug
  • Selector to switch between programming the device (fabric) and debug mode
  • On-board 20 MHz crystal for system clock
  • On-board 32.768 KHz for RTC
  • 5 user I/Os for debug
  • Option to use internal 1.5 V regulator

新品討論
  產品捷報
耐髒汙的igus直線系統 在跳遠比賽中顯示成績
戴爾科技集團發表多款全新解決方案 提升HPC與AI應用
東芝推出新款三相無刷馬達控制預驅動器IC
大聯大品佳集團推出以NXP iMX8QM為基礎的汽車儀表板及車用娛樂雙作業系統方案
希捷科技發表全新 One Touch SSD
  最新活動
Mentor Calibre Seminar 2019
物聯網資安標章成果發表會
2019 R&S Technology Week巡迴場(台北、新竹)
台灣創新技術博覽會
英特爾工業物聯網技術研討會
刊登廣告 新聞信箱 讀者信箱 著作權聲明 隱私權聲明 本站介紹

Copyright ©1999-2019 遠播資訊股份有限公司版權所有 Powered by O3
地址:台北市中山北路三段29號11樓 / 電話 (02)2585-5526 / E-Mail: webmaster@ctimes.com.tw